The decoiler machine is a special equipment for leveling sheet metal, which is used for leveling line steel plate, and uneven plate. It can be manufactured into decoiler, leveling, cutting production line and other plate products production line according to the relevant configuration. It is widely applied in machinery, vehicles, metal products, household appliances, steel structure, decoration and other industries.
The decoiler machine is one of the essential equipment in the welded pipe production line. One of its functions is to support the steel coil by tightening the inner hole of the steel coil. The other function is to feed the steel head into the leveler by rotating with the cooperation of the unbender unit. Therefore, the performance of the decoiler machine is very important to the whole production line. If you want to know something about the decoiler machine price, please contact Hangzhou Roll Forming Technology Co., Ltd.
In order to extend the service life of the decoiler machine, we need to carefully carry out daily maintenance. The steps are as follows:
1. According to the requirements, add oil to each oil cup lubrication points and manual lubrication points.
2. According to the parameters of the decoiler machine, roll the plate.
3. After connecting the power supply, carry out the upward and downward movement of the lower roller and the upward and downward movement of the upper roller, and check whether there is any abnormal phenomenon of jamming in each movement.
4. Operate in strict accordance with the processing procedures and operation methods of the decoiler machine. When the upper roller is lifted to the limit position, great attention should be paid to the safe operation of the equipment.
5. Only after the main drive stops, the upper roller can be lifted and lowered, the inverted bearing can be reset and the upper roller can be warped.
6. In the process of operation, if irregular noise, impact and other abnormal phenomena are found, stop the machine immediately and conduct inspection.
7. During operation, every operator shall coordinate with each other and follow the command of the staff in charge of the plate rolling. It is not allowed to start the machine without permission.
8. Attention should be paid to the operation of plate rolling of the decoiler machine to prevent the hand from being pressed by the steel plate and rolled together with the steel plate.
9. When travelling crane is lifting the steel plate or the reel, pay attention not to collide with the machine.
After the work of the decoiler machine, make sure all the materials are used, clean the site, complete the maintenance of the equipment and turn off the power in time.
